how-to-replace-the-flint-in-jobon-lighter

How to change the Flint in Jobon lighter?

How to change the Flint in Jobon lighter?

How to change the Flint of Jobon lighter, it’s a standard job as you can see, no obvious way the trick is. Now follow me step by step.

First of all, extract the Flint Assembly thumbnail, lift it a little bit, and sort the whole thing like you can see here.

how-to-replace-the-flint-in-jobon-lighter

There’s a screw at the end. Behind this screw, there is a screw that holds the Flint inside up against the wheel. 

replace-the-flint

What we’re going to do is we’re going to take that screw out and then put in a new Flint. Make sure that the screw isn’t going anywhere; slow down release and outcome a little.  

how-to-replace-the-flints-in-jobon-lighters

There should be a little piece of metal there, which is the piece that goes between the Flint and the screw, so we take our new Flint from our pack, pop the Flint down inside, and then put the little metal plug at the end of the plug.

how-to-replace-the-flints-in-jobon-lighters
change-the-flints-in-jobon-lighters

Then go inside there, and the little all squeeze down, and now we can wind up the screw. We don’t need to do it uptight because it’s not going anywhere.

jobon-lighter-flint

Once you got the assembly back together, now get this back in the right orientation. You’ll see the curved side matches the shape with a lighter, pop those together like that, press home, and rotate slightly.

Finally, put in some fuel, and we should be away in charge of a short turn on the lighter and now it works.

refill-the-butane
how-to-replace-flint-in-a-zippo-lighters

How to replace flint in Zippo Lighters?

How to replace the flints in your Zippo lighters?

If you are having problems with your Zippo lighter, not sparking, or not lighting, your flint may be the root cause of the problem. This tutorial brings you through all the steps necessary to add, change, or replace the flints in your Zippo wick style lighter. Firstly you must take the lighter insert out of the lighter casing. After that you need to flip the insert upside down to access the flint canal. Unscrew the golden screw and pull out the screw and spring combination. Tap out any small or unused portions of flint and add a new flint into the chamber. Screw your screw back on, put your lighter insert back into the Zippo sleeve, and you are good to go!

If you love your Zippo torch lighter, and want to make sure how to replace the flint, let’s follow this tutorial step by step.

How to replace flint in Zippo?

First of all, let’s get to know the structure of flint. They include flint, thimble, spring, and screw.

How-to-replace-flint-in-Zippo

Pull out the inner unit (insert) from the case and unscrew the screw

To replace the flint for zippo, the inner unit needs to be removed, which is different from ordinary inflatable lighters. Pull out the lighter liner and turn the liner upside down, align the bottom screw by using a screwdriver or other tools, and unscrew the back cover screw.

replace-flint-tutorial
replace-flint-in-torch-lighter

Clean out the remaining flint

When the screw is unscrewed, the screw will automatically pop out due to the elastic force of the internal spring. Remove the screw and pour out the remaining flint inside the lighter. Then put the new flint into the flint pipe.

replace-flint-in-a-zippo-lighter
how-to-replace-flint-in-a-zippo-lighters

Tighten the screws

When the new flint enters the flint pipe, insert the pin into the aligning pipe. You can also move the spring thimble left and right in order to make the flint and the steamer fit better. Finally put the inner tank into the zippo lighter shell, and you’re done here!

how-to-replace-flint
how-to-replace-flint-in-a-zippo-lighter

Note

The flint of the zippo lighter may use a special flint due to the fire efficiency of ordinary flint and special flint for Zhibao are different.

 

When replacing the new flint, make sure to pour out the remaining fragments of the old flint so that the new flint can be better placed.

why-use-torch-lighter-with-torch-lighter

Soft flame lighter compared torch lighter

Soft flame lighter compared torch lighter

There are various excellent cigar lighters on the market, and the type of lighter you use is as important as how to ignite a cigar. So what is the difference between using a soft flame and a jet flame lighter? On that score, many cigar lovers will have their own preferences. But when it comes to cigars, you want to make sure you’re making the best investment for your money.

When getting started there are a few different things you should know about the soft flame lighter and the torch one.

Jet flame lighters overview

Pros

Jet-type flame lighters are dynamic, innovative, and attractive. The first benefit is that the cigar can be lit quickly and thoroughly with an ultra-hot flame, and cigar lovers don’t need to smoke while Igniting it. The second reason is jet-type flame lighters are a good helper for outdoor activities. Its windproof and windproof properties make it easy to light a cigar in challenging conditions such as on the beach or on a boat, or a windy, chilling evening in the garden. If you’re a fan of cigar accessories, there are new high-performance models launched every year from different brands, including single, double, triple, and quadruple cigarette lighters. Some are designed with ejectors at special angles to keep the flame more focused. 

soft-flame-vs-torch-flame

Torch lighters can also remedy uneven cigar combustion by lighting only the uneven part. Now, most lighters come with additional features such as a built-in cigar snipper, a window to monitor fuel levels, and a protective cover. In addition, there are tabletop-type jet flame lighters with large fuel tanks that do not require frequent refueling and are placed in public places for multiple uses.

how-to-use-soft-flame-to-light-a-cigar

Cons

Jet lighters have a flame temperature of about 2,300 degrees, twice that of a gentle flame, which can go too far if you’re not careful.

One of the most common mistakes you can make when using a jet lighter is to light your cigar too close to the bottom for too long because the top of the flame is colorless. For this reason, you need to keep the lighter away from the bottom of the cigar to avoid burning or flavor deterioration caused by heavy butane jets. Also, if you put a butane lighter in your jeans or jacket, fluff and debris can clog the injector. That’s why you need to clean a jet torch lighter,  another solution is occasionally to blow the injector with compressed air to clear the blockage and ensure optimal performance. 

Soft light flame lighters overview

Pros

Soft flame pipe lighters burn at about 1,400 degrees, which is less intense than jet flame lighters, so they are less likely to scorch the cigar and transfer the butane odor to the cigar. Although it takes longer to light a cigar with a gentle flame, a cooler and slower fire preserves the natural flavor of a handmade cigar’s premium leaves and allows for better control of the temperature at the bottom. Some light flame lighters feature a double fire with an extra-wide flame, suitable for lighting cigars with a larger ring diameter.

soft-flame-lighter-vs-torch-lighter

Soft-flame lighters tend to be very durable, it requires little maintenance and has few component failures. And sure thing, it also no ejectors to clean, soft flame lighter can be easily replaced with flints. Some ultra-high-end lighters are light flame lighters because they require less maintenance and last longer. soft flame lighters are easy to travel with, but if you accidentally leave a jet flame lighter in your coat pocket while traveling, you should be prepared to have it confiscated, subject to TSA restrictions.

Cons

The biggest drawback of soft flame pipe lighters is their ability to prevent the wind from blowing out a cigar when it is lit outside. Therefore, you will need more patience when using a soft one. Gently rotate the cigar over a soft flame to light the bottom of the cigar. For many cigar aficionados, one of the pleasures of cigar tasting is to slowly light the cigar so that the initial flavor evolves, but if your wife taps her watch while you sip, stick with a jet flame lighter.

soft-flame-lighter-compare-with-torch-lighter

In fact, jet flame lighters are the first choice, even the only one that is acceptable for the ritual activity of smoking. The reason is that the fuel that butane lighters burn does not affect the smell of tobacco itself — that’s right, the basic lighters that you can buy at any convenience store, gas station, or cigarette store do. But a good torch lighter will serve you well in any given situation and it will last much longer as well.

Whether you light a cigar or pipe, butane lighter fuel is of reliable quality, ensuring that no other chemical residue or flavor will get into your tobacco each time you light it up. 

Jobon-torch-lighter-review

Jobon Torch Lighter Review 2021

What is Jobon Lighter?

Jobon jet lighter powerful jet flame brings you a new experience, especially if you like to spend your evening windy in the garden. I bet it’s powerful enough and won’t go out.

Quality Material

It’s made of metal material has good corrosion resistance, which can maintain the original texture of the lighter for a long time.

Multicolor Exterior Design

A variety of colors match the ever-changing you. The surface design of this torch lighter is polished, very delicate, and comfortable in the hand.

Jobon-torch-lighter-for-fathers-day-present

This lighter is beautiful. It feels good in the hand with just enough weight to feel substantial. It looks classy, as a lighter that is being used on expensive cigars should. It just helps to set the mood for a nice herd session.

Jobon-torch-lighter

Please note that the lighter is empty and doesn’t fully fill butane because of safety policy. But don’t worry, they have clear instructions for anyone that doesn’t know how to fill a butane lighter. The instructions even cover maintenance tips. After filled lighter up and it worked flawlessly. 

Jobon-torch-lighter-review-2021
Jobon-torch-lighter-review-2021

You could also check our tutorial on how to refill a torch lighter.

The only negative thing I can think of is you need a tool to change the flame height, but this is also a positive because I have had lighters in the past that the valve was too easy to turn and would get turned up or down in my pocket and that’s just annoying.

Any cons about Jobon jet lighter?

Has a good weight to it, feels really great to hold and ignite. It fills easily, and the vertical design is definitely stellar enough to get any friend to ask where they can pick one up themselves.

Jobon-torch-lighter-review

It comes with a small manual detailing its instructions, warranty, troubleshooting, etc. My only gripe isn’t even detrimental to this excellent torch. If it comes with a neat cigar cutter thing will be better, but I don’t smoke cigars. So it’s ultimately a nonfactor in owning this item. I use it as a camping torch and emergency flame for the car.

Makes getting a fire going, a walk in the park. Got a few for each car and my camping kit. They’ve been 100% reliable.

Where to get this beautiful Jobon lighter? 

Why-use-Non-Disposable-Lighters-and-where-to-buy-them

Why use Non-Disposable Lighters and where to buy them?

Why use Non-Disposable Lighters and where to buy them?

Non-disposable lighters reduce the impact of plastic on the environment (360 million disposable lighters are tossed every year). Image when you see these plastic lighters everywhere in landfills, or disposable lighters found in the stomachs of dead birds, you will be shocked. If you’re a cigar lover or BBQ fantasy that uses lighters frequently, it’s best to use a metal refillable torch lighter to reduce plastic waste.

Why-use-Non-Disposable-Lighters-and-where-to-buy-them

What’s disposable lighter?

The disposable lighter is composed of more than 20 parts including plastic shell, sparker, hand pressing, wind hood, fire ring, ignition spring, leather pad, sponge pad, etc. This kind of lighter is a small fire-fighting device, without an inflator. And it cannot be inflated repeatedly, yet the flame size is adjustable, simple structure, and easy to use.

Why-use-Non-Disposable-Lighters-and-where-to-buy-them

What is a refillable torch lighter?

As we’re talking above if you don’t want to produce more plastic disposable lighters yearly, the Torch is your best bet. A torch lighter uses butane fuel as opposed to ordinary lighter fluid. By filling butane, powering it, then it causes the lighter to burn much hotter, reaching temperatures of up to 2,500° F. It is easily recognizable by its bright blue flame. And most of them can be triple or four jet flames. Toss it in a tool box, a survival kit, or slip it in your pocket—it covers all of those uses. 

Why-use-Non-Disposable-Lighters-and-where-to-buy-them

Where to get the Best Non-Disposable Lighters

China is the world’s largest lighter producer, with an annual production capacity of tens of billions, of which about 60% are exported abroad, occupying 95% of the world’s market share. The Man’s Toolbox provides torch lighters of the Jobon series, including single flame, tripe flames, and four flames. And these Jobon triple jet flame cigarette lighters are so well designed. 

Good value and this is something you need to know how to fill the lighter with pure butane.

1.Before refilling a butane lighter, it is necessary to drain any remaining fuel from the lighter. Using the small screwdriver press the fuel-refilling nozzle (at the bottom) to remove the leftover fuel.

2.Turn the flame adjustment screw clockwise until it stops to turn off the fuel flow before refueling.

3.Point the fuel nozzle up and push the container of fuel into the lighter. Turn the fuel nozzle down and wait while the lighter refills. It is important not to pump the fuel can into the lighter while refueling because this may cause the fuel tank to burst.

4.Once the lighter is refilled, allow it to rest until the fuel becomes room temperature. Butane fuel is cold while refilling. It will expand as it gets to room temperature.

5-best-gift-ideas-for-dad-in-christmas-2020

5 Best Gift ideas for Dad in Christmas 2020

5 Best Gift ideas for Dad in Christmas 2020

Ever worried about what to give the dad? Though he says wants nothing for this Christmas. Christmas gifts for dad focuses on putting a smile on your lovable hard-working father’s face with the perfect gift he longs for. I share some gift ideas that I used to try in the past years, it’s simple, but still no outdated.

For Dad who is an outdoor sports enthusiast – Bike Phone Front Frame Bag With Repair Tool Kit 

Grab this bicycle front frame package, which includes a tire repair kit and a 10-in-1 hex wrench. It covers all features that make most cycling enthusiasts excited.

15-in-1 multifunctional bicycle tool. The bicycle multi-function tool is made of high-hardness stainless steel and plastic. Professional craftsmanship, stylish design, durable, sturdy, and portable. This bicycle multi-function tool integrates multiple types of hex wrenches/hex wrenches, flat-blade screwdrivers, Phillips screwdrivers, T25 Torx screwdrivers, bicycle chain cutters, and bicycle spoke wrenches and prepares most bicycles for your dad. Tools for daily maintenance needs.

Gift for Dad to lower back pain – Back Brace Posture Corrector

If your dad has back pain for weeks because of work/, he usually complains sitting, standing, laying down always paining him, different positions didn’t alleviate it. and it was difficult sleeping at night because every sleep position was painful. This back brace corrector supports and helps hunched back or kyphosis in the thoracic and cervical upper back caused by sitting at a desk with poor posture. Correct your posture is crucial for aligning the lumbar lower back to help relieve pain and symptoms such as sciatica, lordosis, and scoliosis.

Based on Ergonomics design with adjustable straps to fit waists circumferences from 26 to 49.5inches.
Multiple sizes:
S: 26-31.5 inches
M: 31-35.5 inches
L: 35.5-39.5 inches
XL: 39.5-43.5 inches
XXL: 43.5-49.5 inches.

Gift for Cook dad – Best professional knife sharpener

Most dads have their toolbox, even a cook dad, he got his best knife kit and sharpener for delicious food. 4-in-1 practical design. This sharpener provides 1 scissors grinding groove and 3 steel knife grinding grooves. Suitable for most steel knives and scissors (except ceramic knives, serrated knives, wavy knives, or scissors). If your dad has all the different kinds of knives, from German to Japanese (which is often the case for serious chefs) in your house kitchen, get this for a try!

For Cigar Dad – Best Triple flame Torch lighter

The lighter arrived ahead of eta and worked perfectly. The three flames assure a prompt light of even the most stubborn stogie. A great buy – If your dad is a cigar lover, and he is finding a powerful & windproof jet flame lighter, instead of spending way more on other lighters only to have them soon fail. These Jobon Triple Flame Torch Lighters are very reliable and long-lasting.

It has great quality, weight, sturdy, looks wonderful. The only thing is that it comes with no fuel preloaded for safety concerns, never mind, it could be filled with fuel easily.

Best Xmas Gift for Dad with Beards – Multifunctional Beard Straightener

  • Multifunctional-Beard-Straightener
    Beard Straightener $27.99
    Beard Straightener- Straightening Comb for Men- Electric Ionic faster Quick Heated Brush Universal Voltage

Looking for some great gift ideas for dad with beards? Well then you are in luck, because these days, having a beard is kind of a “thing”, and that thing brings bearded guys into this whole lifestyle of sorts where beards take on a life of their own.

Three reasons why you should buy this Electric Beard Straightener Brush:

2 in 1 Hair Styling Brush


This electric hair styling comb allows men to style their beard and hair within a few minutes. This single gadget can straighten and volumize your hair to get a perfect look for different occasions.

Ceramic coated teeth


The comb teeth are coated with ceramic which allows them to heat rapidly and prevent hair damage. The ceramic tourmaline technology allows the consumers to straighten the hair close to the roots without causing any skin burns.

Dual heat settings


The device offers two temperature settings to suit different hair types and textures – 180 degrees Celsius and 200 degrees Celsius.

From your small days, you have received many gifts from your parents. Especially our dad. Now it’s time for you to return the favor. These small gifts would play its role in the places your dad spends time alone in but will feel warm because there will be this great reminder of you doing something incredibly thoughtful for him.

How-to-fix-a-torch-lighter-that-wont-light-1

How to fix a torch lighter that won’t light?

How to fix a torch lighter that won’t light?

Here’s a great question about torch flame lighters that have plagued cigars, lovers, for years: Tom B. wants to know, “Why do the brand new lighters I buy always seem to stop working not long after I purchase them… either they won’t light or the flame sputters.” Well, I’ve got the answer on how to fix that problem for good, so give this one a quick tutorial, now.

How-to-fix-a-torch-lighter-that-wont-light

Butane lighters are convenient and often economical fire sources, but sometimes you will find it doesn’t work properly. To know how to make simple repairs at home can save you a costly manufacturer service repair or even having to replace the lighter with a new one.

First of all, follow the instructions that came with your butane lighter. They often have troubleshooting tips. Referring to the instructions for your exact lighter model will give you the most specific and helpful advice. 

How-to-fix-a-torch-lighter-that-wont-light-2

Step 1

Press the ignition button or slide the cover, as required, to release butane gas into the burner chamber. Listen for the hiss of the gas as it leaves the lighter.

Step 2

Adjust the flame height control — commonly located on the bottom of the lighter — with a blade screwdriver. Turn the flame adjustment toward plus or “+.” Try to light the butane lighter.

Step 3

Bleed the tank to remove old butane fuel and any air that may be trapped. Press the fuel-fill valve with the screwdriver blade and hold to release the fuel and air.

Step 4

Place the fill nozzle of a butane fuel can against the lighter’s fuel-fill valve. Push the can against the lighter for at least 10 seconds to transfer the butane to the lighter.

Step 5

Clean the lighter’s burner chamber with compressed air. Insert the directional nozzle onto a can of compressed air. Hold the tip of the nozzle about 1 inch from the burner chamber. Direct several short blasts of air to remove any carbon deposits or debris.

Now have a try on your butane lighter and Comment below and let us know if this informative tip helps. If you need a new triple or four jet flames lighter, try Jobon torch lighter.

honest-torch-lighter-review-2020-August-comparison

Honest Torch lighter Review 2020 August | Comparison

I’m going to talk about the torch lighter that I just bought. I’ve been using it for a couple of days and I’m very very happy with it. So it’s time to talk about it, this was recommended by someone on Instagram they know who they are. I greatly appreciate a big thumbs up when I was talking about lighters, and I want to get something for the pouch because I had the little cheapo one in there, which happened to fit fine.

 

I just wanted a slender lighter that I would be able to use for many years. so I wanted decent quality lighter this one was recommended. When I first saw it, I’m like that’s it, I have to get that one. And I weighed a little bit hesitated because I don’t really want to spend 30 bucks on the new lighter. However, my mind straightly told me I should get it, and finally, I did.

butane lighter-edm-items-for-pocket (6)

 

So um yeah here’s the butane lighter it’s a very simple concept you see on a standard lighter we have a wheel which rubs on a flint there’s a spring that pushes a flint up there so it rubs on the fly it makes a spark and as we’re sparking the same time, we’re hitting this little button here which releases the gas, this is like forked in there if you’ve never taken a later part. And when you push the button down at pivots and lifts up a little collar which let’s gas come through. So in one sweeping motion, we’re sparking. You’re letting gas out and obviously, when we’re doing this, we’re holding the button down so gas is coming out till we let go and we let go the flame goes out. Simple concept great designs in a million layers.

a-new-edc-lighter-for-my-pocket

This one is different, there is no button there instead of the buttons down here, so we have an on and off switch essentially. The little dot is off and the fire is on, so what you can do with this, and the concept behind it is you can use the lighter to spark tinder or kindling or whatever to start a fire without the gas. If you run out of fuel, you can still light a fire, but you can still spark your lighter without wasting gas.

a-new-edc-lighter-for-my-pocket

On this lighter, if I want to spark it, you know and there’s gas in there I’m gonna be hitting that button every time. I’m saying so it’s hard to spark this without hitting the button.

honest-torch-lighter-review-2020-august-comparison

So again I can spark this as much as I want without wasting any of the gas. All you have to do is rotate this and turn the gas on the second, you’re gonna hear it that’s the on position any off position, so that’s essentially replacing our button alright. So you turn it on spark it and then there’s our flame. I have a set kind of high you can adjust this higher or even lower. It has a strong butane plane, all right you guys can see that right and when I watch this later off simply rotate. The design is very well, it makes it hands-free because you have to hold on to its button if you use the previous lighter.

honest-torch-lighter-review-2020-august-comparison

 

Hand-free is the most advantages of this torch jet lighter, so turn on the spark that left it on the table if I want it sits upright I can do projects if I want to. I don’t know heat color something anodized something like that you know, or if I want to you know shove it deep into you know my fire. Then I’m trying to get started whatever the case may be it can use it hands-free. Two benefits of leaving the gas off, just sparking it or using a lighter in a hands-free fashion which is really really cool now.

honest-torch-lighter-review-2020-august-comparison

Of course, you’re thinking alright well you keep sparking the thing what happens when the Flint runs out. There’s a little screw in the bottom, and you unscrew that you have a little spring in your Flint, so you can easily replace the Flint. The torch lighters have a couple of different colors. I was very tempted to get they like a sapphire blue, really vibrant, really cool, they also like you know spectrum rainbow color one and I think there’s a there’s a fourth color. But anyway, I end up going with the gunmetal gray. I’m very happy with it and it’s replacing the cheapo layer.

torch-lighter-edm-items-for-pocket

Thanks do the job even better and it’s kind of classy and different. So that’s my pocket EDC option for a long time like I said I might change. They also make a black one, that’s what it was I’ll get the black born in the future replace it with a black light and get the black Fisher Space. Pen alright gonna be kind of cool to a little black set up there, I just like having a consistent a theme I guess. But anyway there you go if you guys have that later. Let me know what you think of it long-term if you have all the lighters, they like you know to write those. As well people love lighters, I love using lighters for all kinds of stuff.

how-to-refill-a-butane-torch-lighter

How to Refill a Butane Torch Lighter

How to Refill a Butane Torch Lighter? Today I will share my experience about refilling the gas jet light. This method has never failed for me and I can say that doing a purge has greatly increased the number of cigars that can be lit before a refill.

torch-flame-lighter-for-cigar

Release all tank pressure by pressing on the inlet valve with a small screwdriver or a XIKAR MTX Multi-Tool bleeder. Hold the lighter vertically while bleeding the valve. Repeat this several times until all fuel/ gas pressure is released.

Set flame adjustment to the lowest setting (-).


Turn lighter in an upside-down position and insert a butane tank tip directly on the fuel valve. Do not shake the can of butane! This increases the amount of propellant in the mixture that goes into the lighter, and should not be done. Press down firmly for about 5 seconds.

How-to-Refill-a-Butane-Torch-Lighter

Before igniting lighter, wait 3-4 minutes.? This allows excess butane to evaporate and gas inside lighter to reach room temperature.


Set flame level to the desired height by turning the flame adjuster wheel.

Is there anything you might add or detract from this guide? Comment below.

a-few-little-tricks-made-torch-lighter-difference

How to make a jet torch lighter work perfectly

How to make a jet torch lighter work perfectly? This will be rather wordy but perhaps my long-term experiences with these can help others frustrated by the unit as I initially was. 

Initially (~4y ago) when I first tried these jet lighters (as did a friend), we were both very frustrated as they seemed to work well for a short spell (a few weeks) then sort of died. More clicks, fewer lights progressively, etc. Over time, however, we learned that these units just need to be ‘understood’ and little quirks (if unnoticed) cause them to progressively fail.

We tried the high end’ butanes, the ultra mega 5,000x virgin filtered GLacier butane blah blah blah, no improvement. But here’s what we learned that has made all the difference…

As noted by some – the butane tank is relatively small so refills are needed perhaps a bit more often than other torches, remember there are 3 jets too. Well, if you look closely at the ‘fill port’ on the bottom, you’ll notice it is also a flame intensity/output control with a standard screwdriver type ‘slot’ for turning to adjust…noting the + and – symbols to show which way to turn the port-adjuster screw.

Now, probably 80% of you are like ‘yah yah tell me something I didn’t know!’ right? Well here’s the thing… just by virtue of ‘filling’ the tank with a butane canister tip, that ‘activity’ alone causes ever so slightly the adjustment screw to turn a bit – so over time with each refill the adjustment was getting turned DOWN so eventually click click click SPUTTER pop pop fizz ‘Nuthin. Because the adjustment is unwittingly being reduced to non-functionality bit by bit with each refill ERGO, make sure you re-adjust the fill port screw every so often BACK UP to a working amount (may only be half a turn makes all the difference.

Second, when refilling, we learned that sort of pushing the canister tip in-out whilst also moving the lighter level, vertical, upside down, sideways, etc bleeds a lot of the air out allowing for a greater fill…BUT BEWARE…

1) It further causes the intensity screw to ‘reduce’ fractions at a time, so again, mind the setting screw and adjust it to backup a titch. AND


2) doing so gives a greater fill but also causes the unit/fuel to be VERY COLD. The lighter often wont light for a while unless/until you warm it back up (put it in pocket for 5 mins, hold it in your hand etc. The butane doesn’t like to light when very cold. So if you’ve just filled the unit, there’s a good chance it’s COLD and click click click ‘nuthin. Just warm it up and away she goes.


Finally, every so often take one of those PC compressed air cans and blast out the jet/spark area that tends to gather pocket lin\ lt, etc. preventing a spark and thus ignition. A good blast with your own mouth often helps almost as well. Keep it clean/lint-free.

Lighter-Quadruple-Refillable-Gunmetal

Conclusion


1. Repeated filling causes death by fractions, the adjuster screw sloooooow (and imperceptibly!!) reducing each time you insert the canister tip. Keep it adjusted up accordingly after every few fills.


2. Tip the lighter left right up down this way that way whilst inserting the canister tip over and over as if ‘pumping’ the lighter while refilling, it will fill MUCH better, BUT


3. Will be COLD (needs to warm back up to light well) and will cause the screw to reduce even more – so keep it adjusted up, as above.


4. Keep the jet/spark area clean.


We now have no problems whatsoever going on 3+ years with a few of these lighters each. Not a speck of problems. Easy peasy we just needed to learn the nuances that make a good lighter seem like a bad one that dies. If you try the above, I bet almost everyone will realize the same issues. Anyway good luck.I