How to change the Flint in Jobon lighter?
How to change the Flint of Jobon lighter, it’s a standard job as you can see, no obvious way the trick is. Now follow me step by step.
First of all, extract the Flint Assembly thumbnail, lift it a little bit, and sort the whole thing like you can see here.
There’s a screw at the end. Behind this screw, there is a screw that holds the Flint inside up against the wheel.
What we’re going to do is we’re going to take that screw out and then put in a new Flint. Make sure that the screw isn’t going anywhere; slow down release and outcome a little.
There should be a little piece of metal there, which is the piece that goes between the Flint and the screw, so we take our new Flint from our pack, pop the Flint down inside, and then put the little metal plug at the end of the plug.
Then go inside there, and the little all squeeze down, and now we can wind up the screw. We don’t need to do it uptight because it’s not going anywhere.
Once you got the assembly back together, now get this back in the right orientation. You’ll see the curved side matches the shape with a lighter, pop those together like that, press home, and rotate slightly.
Finally, put in some fuel, and we should be away in charge of a short turn on the lighter and now it works.