Best Tutorial of Refill an Empty BIC Lighter
What you’re going to need for this is a completely empty BIC lighter, a pushpin preferably white some butane, and three rubber grommets.
Get these in a minute, optional items are some clippers and a file. (How to fix a torch lighter that won’t light?)
The first step is going to be to open up the valve at the bottom of the lighter, the way that big fills are lighters is they fill it through. This hole is tiny and then when they’re done they Jam, so a tiny little BB in there will be the best.
One way for us to get in there is to just jam the BB into the cartridge and leave it there. The way to do that is to use a pushpin you put it in the hole, put it on a hard surface, and you push that’s it you can hear that the BB is in there so your job is done. When you pull this out you’re going to get a little spray. That’s why you want to completely empty a bit lighter because you’re going to get a little more spray if there’s any liquid left.
The next step is to get your butane ready this is where you need the three rubber grommets, Depot, and a little variety pack in the hardware aisle. They were extremely cheap and out of the variety pack you want the ones that fit over the nozzle perfectly.Â
Then put three of them on there so that the rubber comes just a little bit past the tip of the nozzle when you’re ready to go alright now. We’re ready to fill the pick this part is a little difficult, but once you get the hang of it it’s not that tough.
The next step takes the nozzle that you prepared and put it in the hole or over the hole, the rubber is going to keep it sealed really well actually so put it on there. And then you’re going to push down well the rubber is such a good seal.Â
Are you looking for some torch lighter for daily use?
Torch lighters you may like
You’re going to not even going to hear anything so think it’s not going but let it go for a while, it should be filled by now. What you’re going to do is taking this off and put your thumb over it immediately. So then you take your pushpin and you got to immediately put it in the hole as fast as you can, and obviously, the faster you do it the better. but you can hear it’s filled with liquid.
BIC is ready to go and working the next step is just cosmetic, to make your big lighter doesn’t look that weird and it’s not awkwardly shaped. All you do is take some snippers and cut off the top and you file it down. That’s all about how to refill a Bic lighter.
