fix-butane-lighter-Troubleshooting -Tutorial (1)

Fix Butane Lighter won’t spark? Troubleshooting & Tutorial​​

Fix Butane Lighter won't spark? Troubleshooting & Tutorial​

Normally, the torch lighter usually keeps a few minutes of low temperature after refilling, you should ignite it after a while. If the torch lighter sparks but doesn’t light after refill, this troubleshooting guide may help.

Troubleshooting & Tutorial

1. Check if the filled gas has the same purity as the butane filled before. It is recommended to purchase relevant accessories from brand manufacturers as much as possible.

2. Check whether the air inlet is blocked by foreign objects.

3. Whether the igniter has enough power and whether there is damage.

4. Try turning up to “+” the lighter valve. To do that, please adjust it higher by a little, testing whether it can be used normally. Do not turn the valve up too much at one time, or the jet flame will be too big or fail to hit.

fix-butane-lighter-Troubleshooting -Tutorial (1)

5. Adjust the ignition wire or replace the flint. The specific investigation steps are as follows.

If you’re using a piezo lighter:

1) Firstly Completely close the valve

2) Then observe the moment when the lighter is started, you can see the spark of the ignition wire. (If no sparks are produced, your lighter has reached the end of its life and needs to be replaced with a butane gas lighter.)

fix-butane-lighter-Troubleshooting -Tutorial

If the spark is generated on the edge of the butane spray outlet, you can adjust the lead wire with a screwdriver so that the ignition wire is directly above the air outlet.

Fix Butane Lighter wont spark
fix-butane-lighter-Troubleshooting -Tutorial

Open the valve and test whether it returns to normal.

If it’s a flint ignited torch flame lighter:

1) Make sure completely close the valve

2) Check if there is any spark generated when you turn on the butane lighter. If there is no spark, then the flint should be replaced. However, due to the particularity of jet lighters, it is more difficult to replace flint parts. You can check our previous article on how to replace flint.

5-Common-Issues-that-torch-lighters-won’t-light,-how-to-fix-(2)

5 Common Issues that torch lighter won’t light, how to fix?

5 Common Issues that torch lighter won’t light, how to fix?

If you get upset because your torch lighter doesn’t work properly, please don’t worry, now take a few minutes to read this tutorial and bring your lighter to life again.

These are five common issues for a lighter that fails to work, go and check which one is the problem with your butane lighter.

  • Butane Lighter Tank is Empty
  • Need to High or Low your Fuel Adjustment
  • Try to Ignite but No Spark
  • Burners get Clogged
  • Air Trapped In Fuel Lines

Butane Lighter Tank is Empty

Most people thought the butane lighters were fulfilled when first purchased online. When they finally got the lighters in hand they found it didn’t work. Actually, due to the transportation safety policy, lighters are not allowed to install fuel during transportation. So make sure you fill the butane fuel correctly when you get the lighter. See how to fulfill butane fuel for your lighter correctly.

While sometimes you bought a new lighter, it worked well when first used. Butane is exhausted after a period of time using, however, you’ll see it doesn’t work well after refilling it. Many people doubt the bad quality of the lighter. In fact, this is not the case, most of this is caused by the different quality of the gas we use.

Need to High or Low your Fuel Adjustment

When your lighter flashes and then goes out. In this case, it is generally caused by the small opening of the valve or the low gas pressure. Just fix it by adjusting the valve slightly larger. Most lighters have a black rubber ring around the bottom of the air inlet, marked with a + sign – sign on this ring.

Use a flat-blade screwdriver to clamp the gap, and in the + direction, adjust it counterclockwise. After the adjustment, test it and it can fire normally. But if the gas exhalation is too loud or to spray open flame, it means that the valve is opened too much. It is necessary to adjust the valve lower.

5-Common-Issues-that-torch-lighters-won’t-light,-how-to-fix-(1)

Try to Ignite but No Spark

More commonly, the igniter end might be dirty. I’ll try to use a can of compressed air to blow and clean the end of the lighter if my lighter isn’t working. If it still doesn’t work after cleaning. The worst-case scenario would be that the ignition is dead.

Burners get Clogged

Please keep your lighters clean regularly. Impurities in cheap butane, lint, and other substances can clog the burner and make your lighter get stuck to work. This quick guide could help you solve it easily.

Air Trapped In Fuel Lines

There are usually other gases left in the fuel lines after the gas of the lighter is used up. First, release the air inside before you refill the butane gas. Try to use a small stick to press the inflated place and deflate until there is no sound of deflation. Once done, put it aside for half an hour before inflating your lighter until the gas inside is stable. Please feel free to check this tutorial on how to fix lighters that won’t light.

Are you looking for a new jet flame torch lighter? Check Man’s Toolbox.

  • Jobon Triple Jet Flame Torch Lighter

    $27.99 Add to cart
  • Jobon Triple Jet Flame Torch Lighter (Purple)

    $27.99 Add to cart
why-is-my-torch-not-igniting-after-refilling

Why is torch lighter not igniting after refilling?

Why is my torch lighter not igniting after refilling?

Some people complain that their inflatable lighters can’t hit after refilling the butane fuel. First, you need to purge any remaining air and fuel from the torch lighter. Then, you can pump the butane fuel into the lighter and wait a few minutes before you test it to make sure it’s working. Here are roughly the following reasons for this situation.

1. The gas valve is too open, and the flame disappears in a flash during the fast spread. Try to turn the gas valve down, but adjust it again if the air is not enough to ignite.

2. The pressure of the butane fuel gas you buy is not enough. It is recommended to buy high-pressure butane. Don’t forget to check the pressure outside the cylinder before purchasing it. 

why-is-my-torch-not-igniting-after-refilling

3. The fuel gas purity is not enough. Some unbranded or pirated gas can have your lighter fail to ignite. Some bad gas will also contain impurities, which may cause the lighter outlet to be blocked. Try to discharge the gas in the lighter before refilling it. Well, this situation is relatively rare, so don’t worry too much.

release-the-gas-of-torch-lighter-that-won't-light

4. Wait for 5 minutes after filling the gas before using it. If it still does not work, open the valve slightly (that is, turn slightly to the “+” side). Due to the temperature of butane gas being very low, you need to allow enough time for your lighter to cool off before you try to refill it completely.

fix-the-torch-lighter-that-won't-light

5. The fuel gas didn’t fill in well (many novices encounter this problem). The way to verify is to release the gas and see if any gas comes out. Some torch lighters need to adjust the gas valve to the minimum. Otherwise, it isn’t easy to inflate. If your butane lighter inflator port gets blocked, follow this tutorial to clean your torch lighter.

6. For an inductive touch lighter, please try another button battery if without any sound while touching.

how-to-replace-the-flint-in-jobon-lighter

How to change the Flint in Jobon lighter?

How to change the Flint in Jobon lighter?

How to change the Flint of Jobon lighter, it’s a standard job as you can see, no obvious way the trick is. Now follow me step by step.

First of all, extract the Flint Assembly thumbnail, lift it a little bit, and sort the whole thing like you can see here.

how-to-replace-the-flint-in-jobon-lighter

There’s a screw at the end. Behind this screw, there is a screw that holds the Flint inside up against the wheel. 

replace-the-flint

What we’re going to do is we’re going to take that screw out and then put in a new Flint. Make sure that the screw isn’t going anywhere; slow down release and outcome a little.  

how-to-replace-the-flints-in-jobon-lighters

There should be a little piece of metal there, which is the piece that goes between the Flint and the screw, so we take our new Flint from our pack, pop the Flint down inside, and then put the little metal plug at the end of the plug.

how-to-replace-the-flints-in-jobon-lighters
change-the-flints-in-jobon-lighters

Then go inside there, and the little all squeeze down, and now we can wind up the screw. We don’t need to do it uptight because it’s not going anywhere.

jobon-lighter-flint

Once you got the assembly back together, now get this back in the right orientation. You’ll see the curved side matches the shape with a lighter, pop those together like that, press home, and rotate slightly.

Finally, put in some fuel, and we should be away in charge of a short turn on the lighter and now it works.

refill-the-butane
how-to-replace-flint-in-a-zippo-lighters

How to replace flint in Zippo Lighters?

How to replace the flints in your Zippo lighters?

If you are having problems with your Zippo lighter, not sparking, or not lighting, your flint may be the root cause of the problem. This tutorial brings you through all the steps necessary to add, change, or replace the flints in your Zippo wick style lighter. Firstly you must take the lighter insert out of the lighter casing. After that you need to flip the insert upside down to access the flint canal. Unscrew the golden screw and pull out the screw and spring combination. Tap out any small or unused portions of flint and add a new flint into the chamber. Screw your screw back on, put your lighter insert back into the Zippo sleeve, and you are good to go!

If you love your Zippo torch lighter, and want to make sure how to replace the flint, let’s follow this tutorial step by step.

How to replace flint in Zippo?

First of all, let’s get to know the structure of flint. They include flint, thimble, spring, and screw.

How-to-replace-flint-in-Zippo

Pull out the inner unit (insert) from the case and unscrew the screw

To replace the flint for zippo, the inner unit needs to be removed, which is different from ordinary inflatable lighters. Pull out the lighter liner and turn the liner upside down, align the bottom screw by using a screwdriver or other tools, and unscrew the back cover screw.

replace-flint-tutorial
replace-flint-in-torch-lighter

Clean out the remaining flint

When the screw is unscrewed, the screw will automatically pop out due to the elastic force of the internal spring. Remove the screw and pour out the remaining flint inside the lighter. Then put the new flint into the flint pipe.

replace-flint-in-a-zippo-lighter
how-to-replace-flint-in-a-zippo-lighters

Tighten the screws

When the new flint enters the flint pipe, insert the pin into the aligning pipe. You can also move the spring thimble left and right in order to make the flint and the steamer fit better. Finally put the inner tank into the zippo lighter shell, and you’re done here!

how-to-replace-flint
how-to-replace-flint-in-a-zippo-lighter

Note

The flint of the zippo lighter may use a special flint due to the fire efficiency of ordinary flint and special flint for Zhibao are different.

 

When replacing the new flint, make sure to pour out the remaining fragments of the old flint so that the new flint can be better placed.

Best Tutorial of Refill an Empty BIC Lighter​

Best Tutorial of Refill an Empty BIC Lighter​

Best Tutorial of Refill an Empty BIC Lighter

What you’re going to need for this is a completely empty BIC lighter, a pushpin preferably white some butane, and three rubber grommets.

Get these in a minute, optional items are some clippers and a file. (How to fix a torch lighter that won’t light?)

how-to-refill-a-BIC-lighter

The first step is going to be to open up the valve at the bottom of the lighter, the way that big fills are lighters is they fill it through. This hole is tiny and then when they’re done they Jam, so a tiny little BB in there will be the best.

Best Tutorial of Refill an Empty BIC Lighter​

One way for us to get in there is to just jam the BB into the cartridge and leave it there. The way to do that is to use a pushpin you put it in the hole, put it on a hard surface, and you push that’s it you can hear that the BB is in there so your job is done. When you pull this out you’re going to get a little spray. That’s why you want to completely empty a bit lighter because you’re going to get a little more spray if there’s any liquid left.

how-to-refill-a-BIC-lighter-easily

The next step is to get your butane ready this is where you need the three rubber grommets, Depot, and a little variety pack in the hardware aisle. They were extremely cheap and out of the variety pack you want the ones that fit over the nozzle perfectly. 

how-to-refill-a-BIC-lighter-easily

Then put three of them on there so that the rubber comes just a little bit past the tip of the nozzle when you’re ready to go alright now. We’re ready to fill the pick this part is a little difficult, but once you get the hang of it it’s not that tough. 

Best Tutorial of Refill an Empty BIC Lighter​

The next step takes the nozzle that you prepared and put it in the hole or over the hole, the rubber is going to keep it sealed really well actually so put it on there. And then you’re going to push down well the rubber is such a good seal. 

Best-Tutorial-of-Refill-an-Empty-BIC-Lighter

Are you looking for some torch lighter for daily use?

Torch lighters you may like

Its not about saving money. its about keeping that favorite lighter alive.

You’re going to not even going to hear anything so think it’s not going but let it go for a while, it should be filled by now. What you’re going to do is taking this off and put your thumb over it immediately. So then you take your pushpin and you got to immediately put it in the hole as fast as you can, and obviously, the faster you do it the better. but you can hear it’s filled with liquid. 

how-to-refill-a-BIC-lighter-easily
tip-for-refilling-a-BIC-lighter

BIC is ready to go and working the next step is just cosmetic, to make your big lighter doesn’t look that weird and it’s not awkwardly shaped. All you do is take some snippers and cut off the top and you file it down. That’s all about how to refill a Bic lighter.

best-way-to-refilling-a-BIC-lighter
best-refill-a-BIC-lighter-tutorial
why-use-torch-lighter-with-torch-lighter

Soft flame lighter compared torch lighter

Soft flame lighter compared torch lighter

There are various excellent cigar lighters on the market, and the type of lighter you use is as important as how to ignite a cigar. So what is the difference between using a soft flame and a jet flame lighter? On that score, many cigar lovers will have their own preferences. But when it comes to cigars, you want to make sure you’re making the best investment for your money.

When getting started there are a few different things you should know about the soft flame lighter and the torch one.

Jet flame lighters overview

Pros

Jet-type flame lighters are dynamic, innovative, and attractive. The first benefit is that the cigar can be lit quickly and thoroughly with an ultra-hot flame, and cigar lovers don’t need to smoke while Igniting it. The second reason is jet-type flame lighters are a good helper for outdoor activities. Its windproof and windproof properties make it easy to light a cigar in challenging conditions such as on the beach or on a boat, or a windy, chilling evening in the garden. If you’re a fan of cigar accessories, there are new high-performance models launched every year from different brands, including single, double, triple, and quadruple cigarette lighters. Some are designed with ejectors at special angles to keep the flame more focused. 

soft-flame-vs-torch-flame

Torch lighters can also remedy uneven cigar combustion by lighting only the uneven part. Now, most lighters come with additional features such as a built-in cigar snipper, a window to monitor fuel levels, and a protective cover. In addition, there are tabletop-type jet flame lighters with large fuel tanks that do not require frequent refueling and are placed in public places for multiple uses.

how-to-use-soft-flame-to-light-a-cigar

Cons

Jet lighters have a flame temperature of about 2,300 degrees, twice that of a gentle flame, which can go too far if you’re not careful.

One of the most common mistakes you can make when using a jet lighter is to light your cigar too close to the bottom for too long because the top of the flame is colorless. For this reason, you need to keep the lighter away from the bottom of the cigar to avoid burning or flavor deterioration caused by heavy butane jets. Also, if you put a butane lighter in your jeans or jacket, fluff and debris can clog the injector. That’s why you need to clean a jet torch lighter,  another solution is occasionally to blow the injector with compressed air to clear the blockage and ensure optimal performance. 

Soft light flame lighters overview

Pros

Soft flame pipe lighters burn at about 1,400 degrees, which is less intense than jet flame lighters, so they are less likely to scorch the cigar and transfer the butane odor to the cigar. Although it takes longer to light a cigar with a gentle flame, a cooler and slower fire preserves the natural flavor of a handmade cigar’s premium leaves and allows for better control of the temperature at the bottom. Some light flame lighters feature a double fire with an extra-wide flame, suitable for lighting cigars with a larger ring diameter.

soft-flame-lighter-vs-torch-lighter

Soft-flame lighters tend to be very durable, it requires little maintenance and has few component failures. And sure thing, it also no ejectors to clean, soft flame lighter can be easily replaced with flints. Some ultra-high-end lighters are light flame lighters because they require less maintenance and last longer. soft flame lighters are easy to travel with, but if you accidentally leave a jet flame lighter in your coat pocket while traveling, you should be prepared to have it confiscated, subject to TSA restrictions.

Cons

The biggest drawback of soft flame pipe lighters is their ability to prevent the wind from blowing out a cigar when it is lit outside. Therefore, you will need more patience when using a soft one. Gently rotate the cigar over a soft flame to light the bottom of the cigar. For many cigar aficionados, one of the pleasures of cigar tasting is to slowly light the cigar so that the initial flavor evolves, but if your wife taps her watch while you sip, stick with a jet flame lighter.

soft-flame-lighter-compare-with-torch-lighter

In fact, jet flame lighters are the first choice, even the only one that is acceptable for the ritual activity of smoking. The reason is that the fuel that butane lighters burn does not affect the smell of tobacco itself — that’s right, the basic lighters that you can buy at any convenience store, gas station, or cigarette store do. But a good torch lighter will serve you well in any given situation and it will last much longer as well.

Whether you light a cigar or pipe, butane lighter fuel is of reliable quality, ensuring that no other chemical residue or flavor will get into your tobacco each time you light it up. 

how-to-clean-a-torch-lighter

How to clean a torch lighter?

How to clean a torch lighter?

What’s the best way to light a Cigar?

As a cigar smoking lover, having a torch lighter that can be used repeatedly for a long time can reduce my troubles. I don’t like to use disposable lighters, lighting my cigar is a laborious task. According to a report saying that plastic lighters cause a lot of environmental pollution every year, so I’m trying to treat this earth as kindly as possible.

One of the best ways to light up your cigar is to use a butane lighter. These types of lighters are very suitable for people who smoke cigars, especially butane lighters with concentrated firepower can prevent the taste of cigars from being contaminated by impurities.

Used this great hack to bring your lighter back to life

If you are using a torch jet lighter for cigar smoking, or just use a butane lighter for home use. It is also important to learn about the cleaning method of the lighter, which can ensure that the lighter can work normally for a long time. Well, actually, I was not very familiar with these techniques from the beginning, I also experienced the same troubles as you are now.

The first thing when cleaning the lighter, you need to do is to lower the flame of the lighter. The main reason for this is related to your personal safety. It is very important to be extra careful every time you clean the lighter to avoid severe burns. Make sure to set the length of the flame to the minimum flame setting, so as not to cause the flame to catch fire for some reason and not burn or burn badly.

the-best-way-to-clean-torch-lighter

Next step, using a matchstick. You will take the wooden end of the match (the non-ignitable end), turn the light over, and paste it into the butane valve. Once the matchstick is inserted, press it. If you are not sure where the butane valve is on the lighter, place it at the other end of the bottom of the ignition device. While pressing, you will hear a faint hissing sound, it’s because the air inside the lighter is released from the inside. Do this several times until all the air is released.

how-to-clean-torch-lighter

Using a can of compressed air can help you clean the combustion chamber of the jet flame lighter. If you want to remove all dust and other contaminants that may enter this part of the lighter. If the combustion chamber accumulates too much dust and debris, then it will clog and cannot be ignited.

how-to-clean-your-torch-lighter

Finally, wipe the entire lighter with a soft cloth, make sure that the cloth is dry and completely clean. If you should have to refill the lighter during cleaning, this will wipe away any excess butane that might have spilled on to the lighter.

how-to-clean-torch-lighters
how-to-clean-a-torch-lighter

Whatever, if you’re new to this and have not to try gas lighter so far, here you could see Jobon butane torch lighters in Man’s Toolbox. If this tutorial saved you from curb stomping the torch lighter and spending more money on another, please feel free to share it. For any questions, leave a comment below.

Why-use-Non-Disposable-Lighters-and-where-to-buy-them

Why use Non-Disposable Lighters and where to buy them?

Why use Non-Disposable Lighters and where to buy them?

Non-disposable lighters reduce the impact of plastic on the environment (360 million disposable lighters are tossed every year). Image when you see these plastic lighters everywhere in landfills, or disposable lighters found in the stomachs of dead birds, you will be shocked. If you’re a cigar lover or BBQ fantasy that uses lighters frequently, it’s best to use a metal refillable torch lighter to reduce plastic waste.

Why-use-Non-Disposable-Lighters-and-where-to-buy-them

What’s disposable lighter?

The disposable lighter is composed of more than 20 parts including plastic shell, sparker, hand pressing, wind hood, fire ring, ignition spring, leather pad, sponge pad, etc. This kind of lighter is a small fire-fighting device, without an inflator. And it cannot be inflated repeatedly, yet the flame size is adjustable, simple structure, and easy to use.

Why-use-Non-Disposable-Lighters-and-where-to-buy-them

What is a refillable torch lighter?

As we’re talking above if you don’t want to produce more plastic disposable lighters yearly, the Torch is your best bet. A torch lighter uses butane fuel as opposed to ordinary lighter fluid. By filling butane, powering it, then it causes the lighter to burn much hotter, reaching temperatures of up to 2,500° F. It is easily recognizable by its bright blue flame. And most of them can be triple or four jet flames. Toss it in a tool box, a survival kit, or slip it in your pocket—it covers all of those uses. 

Why-use-Non-Disposable-Lighters-and-where-to-buy-them

Where to get the Best Non-Disposable Lighters

China is the world’s largest lighter producer, with an annual production capacity of tens of billions, of which about 60% are exported abroad, occupying 95% of the world’s market share. The Man’s Toolbox provides torch lighters of the Jobon series, including single flame, tripe flames, and four flames. And these Jobon triple jet flame cigarette lighters are so well designed. 

Good value and this is something you need to know how to fill the lighter with pure butane.

1.Before refilling a butane lighter, it is necessary to drain any remaining fuel from the lighter. Using the small screwdriver press the fuel-refilling nozzle (at the bottom) to remove the leftover fuel.

2.Turn the flame adjustment screw clockwise until it stops to turn off the fuel flow before refueling.

3.Point the fuel nozzle up and push the container of fuel into the lighter. Turn the fuel nozzle down and wait while the lighter refills. It is important not to pump the fuel can into the lighter while refueling because this may cause the fuel tank to burst.

4.Once the lighter is refilled, allow it to rest until the fuel becomes room temperature. Butane fuel is cold while refilling. It will expand as it gets to room temperature.

where-to-get-the-best-triple-torch-lighter-to-light-a-cigar

Have you ever wondered about the best way to light a cigar?

Have you ever wondered about the best way to light a cigar?

Everybody loves a torch for their cigar, but is great to know how to use it. This shows you how I use a triple torch to properly light a cigar.

We’re going to show you the proper way to light a cigar. Now cigars are tough to light they’re big they’re thick they’re made of moist tobacco. It’s not like lighting a cigarette, which has paper around it. The cigar fights the flame so it takes some time to get it going whether you’re using matches or one of these lighters, but whichever method you decide to use, there is a right way to light a cigar.

whats-the-best-way-to-light-a-cigar

Now I have a cigar here that I’ve already cut and trying to use this Jobon jet flame torch lighter to light my cigarette. And this is a triple flame lighter that was built specifically to light cigars now. We will found it uses old technology flint spark.

When struck against steel, flint will produce enough sparks to ignite a fire with the correct fuel, tinder, or gunpowder used in weapons.

I’ve turned the flame up but you’ll get, an idea of what a triple flame lighter is like when you turn it down a little bit it gets to be a large single flame. This is a torch lighter which I use to light cigars on the golf course it’s kind of like an acetylene torch, It’ll light a cigar in any kind of wind rain wherever it’s a great thing to have when you’re out playing golf.

the-best-way-to-light-a-cigar

Now all the lighters we’ve shown you here run on butane gas which is odorless, so it’s a proper way. The fuel reservoir is empty upon delivery for safety reasons. Before refilling a butane torch lighter, it is necessary to drain any remaining fuel from the lighter. If you’re thinking about a better torch lighter for your cigar lighting, this might work for it.